Quality Industrial Weighing Products

Made in North America

Serving Our Customers since 1981

Tel: 1-306-242-2020

Toll Free: 1-800-667-3825

Request a Free Consultation!


These axle pads have a very large weighing surface and low profile making them our easiest method of determining truck axle weight. These axle pads are typically sold in pairs but can also be sold in multiples to get complete trailer or truck weight in one weighment. Truck axle scales can be used with ramps for above ground installations or flush with concrete for a pit-installed permanent application. Above ground installations are forklift portable and should be used with quick disconnect cable (see options).

This system it is not to be used in legal for trade applications.


  • 84" x 30" axle pads for dual axle truck weighing
  • 144" x 30" axle pads for tri-axle truck weighing
  • 168" x 30" axle pads for dual and tri-axle truck weighing
  • 6" low profile for ease of use
  • Wheel load accurate to within 0.25% FS
  • Calibrated with fully traceable certified weights
  • Axle scales can be used on gravel surfaces
  • Forklift portable for use in multiple locations
  • Four year warranty on axle pad frame
  • Two year warranty on truck scale load cells

For more information

Call us Today!

North America:




Request a Quote

To request a quote, please fill in the form below. We will return your inquiry within 24 hours.

Additional Information

  • Specification
  • Options
  • Documents
Rated Capacity (pounds) 84" axle scale: 30K per pad (60K per axle grouping)
144" axle scale: 40K per pad (80K per axle grouping)
168" axle scale: 30K per pad (80K per axle grouping)
Load Cells ML 1100-25K (Output: 2mV/V)
Accuracy Wheel loads accurate to 0.25% FS nominal
Overload Capacity 150% full scale safe overload
300% full scale ultimate overload
Temperature Range -40ºC to +80ºC (operating)
-10ºC to +40ºC (compensated)
Graduation 20lb (30K and 40K capacity)
Material Heavy duty high strength steel
Fatigue Limit Infinate cycles per day (wheel loads)
Ground Requirements The ground must be flat and level, with proper drainage
Dimensions 84" x 30" x 6" (weighing surface)
144" x 30" x 6" (weighing surface)
168" x 30" x 6" (weighing surface)
Sealing Standard IP-66: totally protected from dust; protected from strong jets of water
Power Axle scales are powered by a wired load cell display


Hard wire connection to the indicator is provided at no charge. This connection type is ideal for permanent truck scale installations where the pads will not be moved often. One end of the cable is connected to the axle pad while the other end is left disconnected and wrapped for easy shipping (see photo). Upon recieving the pads, you will hard-wire one cable to the indicator and the other cable to the second axle pad.


Military connections and quick disconnect cables can be supplied at an additional charge. This cable connection is suitable for portable truck scale applications where the pads are being disconnected and moved during use. This connection type also allows for easy replacement of cable should it ever get damaged.


These axle pads have the same specifications as standard axle pad models except for their shorter length. They are often used in trailer weighing applications with the front legs of the trailer being weighed with 30" axle pads while the rear truck axles are weighed with 84" or 144" axle pads. The signals are then summed with a multi-channel indicator for total trailer weight.


Axle pads scales can also be purchased with 50,000 lb load cells (versus 25,000 lb). This doubles the axle scale rated capacity and is used in applications where there is significant shock loading in the weighing process or for industrial heavy-duty hauling applications.